RSP Diamondblades4us High Solids Concrete Densifier 5 Gallons

RSP Densifier LS – Lithium Silicate Concrete DensifierRSP Densifier LS is a lithium silicate densifier intended for use on concrete surfaces. It is formulated for application on freshly placed concrete, existing slabs, and cementitious overlays where surface densification is desired.The product is designed to penetrate into the concrete surface and react with available materials within the substrate. This process is intended to support surface densification and preparation for polished or maintained concrete systems.Product FeaturesLithium silicate densifier for concrete surfacesDesigned for use on new or existing concretePenetrating formulation intended to support surface densificationCompatible with integrally colored, stained, and dyed concreteSuitable for polished and architectural concrete applicationsTypical Coverage (Approximate)Coverage varies based on surface porosity and conditionsSteel-troweled surfaces generally yield higher coverage than rough surfacesTypical coverage range: 400–600 sq ft per gallonApplication OverviewTest in a small, inconspicuous area prior to full applicationSurface should be clean, dry, and absorbentApply when surface temperature is above 40°F (4°C)Do not dilute; mix thoroughly before useFor hot concrete surfaces, light misting with water may be used prior to applicationApplication on New or Existing ConcreteClean surface thoroughly to remove dirt, residue, or coatingsApply using a low-pressure sprayer in a saturating coatSpread excess material with a broom or microfiber padMaintain a wet surface during application as recommendedAvoid spreading once drying beginsWhy Buy from Diamondblades4us?Contractor-focused product selectionFast order processing and dependable customer support

• Key Benefits: Increases abrasion and wear resistance Deep penetrating lithium silicate formula Reduces dusting, sweating, and efflorescence Will not promote surface crazing Extends the life of polished concrete Improves stain resistance and surface durability Dustproofs concrete floors of any age Compatible with integral color, stains, and dyes Reduces long-term concrete maintenance
• Coverage Coverage varies by concrete porosity and conditions Steel-troweled concrete covers more than rough surfaces Typical coverage: 400–600 sq. ft. per gallon
• 5 Gallons of Product
• Application Basics Always test a small area first Surface must be clean, dry, and absorbent Apply when surface temperature is above 40°F (4°C) Cool hot concrete (over 90°F) with light water mist to prevent flash-drying Do not dilute Mix well before use
• New or Existing Concrete Clean surface thoroughly before application Apply with a low-pressure sprayer in a saturating coat Spread puddles with a broom or microfiber pad Keep surface wet for at least 20 minutes, adding product as needed Maintain a wet edge and avoid spreading once drying begins